The NSP front deck pad is a great solution for riders wanting the best possible grip for their front foot or simply don’t like to use wax on their board. If your board already has a tail pad, adding this pad completes your wax-free traction setup.
Thermoformed texture along the pads ensure your feet stay planted at all times. For hard pumping or committing to a tight radius, you will find that the more pressure you apply to the diamond-shaped EVA, the more grippy it gets.
There is nothing worse than a peeling deck pad, which is why NSP uses premium 3M adhesives, as it provides the best possible bond between your board and the thermoformed EVA. Different from conventional EVA, thermoforming gives these pads a more abrasion-resistant layer that will hold up longer. Make sure your board is properly cleaned up before applying the pads, and wait 24 hours before hitting the water to get the best possible bond for years to come. Removal is easiest with a hot air gun and some soapy water.
4 Piece pattern
This 4-piece front deck pad allows you to adjust for the width and height of your board. It’s the easiest to install, offers tons of grip and will work on any board, whether it’s a surfboard, a SUP-board or a foil board.
Directional diamond-shaped pattern
The deeper the grooves, the more resistance against slipping and superior traction. The NSP front deck pad has a 2mm height difference and you will feel its grip increase as you apply more pressure going through turns.
The deeper the grooves, the more resistance against slipping, which makes for superior traction.
The NSP front deck pad has a 2mm height difference and its grip increases as you apply more pressure.